top of page

BMR Power Analyser - Range Overview

PLA 44CM

 

Class A device to EN 61000-4-30

Continuous sampling rate of 40 kHz on voltage and current measuring inputs.

Power quality analyser PLA44 is designed according to the norm EN 61000-4-30, class A for electrical parameters measurement in LV and MV systems, it is based on a 32 bits RISC processor that provides enough power for realtime measurement and calculation of all parameters. Sampling Rate of 40kHz.

Voltage and current are measured continually according to the norm definition with highest accuracy of all measured and calculated parameters.
PLA44CM is the ideal device for monitoing power quality according to standard EN 50160 on energy supply side as well as on consumer side in order to analyse network failures.

PLA 33

Multifunction power line analyser PLA 33 is designed for electrical parameters monitoring in three-phase and single-phase LV and MV systems. Device is based on 16 bits RISC processor that provides enough power for real-time measurement and calculation of all parameters. Voltage and current are measured continuously according to the norm EN 50160, True RMS values are digitalized in all three phases.

PLA 34

Power quality analyser PLA34 is designed according to class 1 for electrical parameters measurement in LV and MV systems, it is based on a 32 bits RISC processor that provides enough power for realtime measurement and calculation of all parameters.

Voltage and current are measured continually according to the norm definition with highest accuracy of all measured and calculated parameters.
PLA34CM is the ideal device for monitoing power quality according to standard EN 50160 on energy supply side as well as on consumer side in order to analyse network failures.

Software

Power Monitoring Software (PMS) is designed for remote control and management of BMR devices with communication interface. So far it offers drivers for power factor controllers and power line analysers. PMS can be installed on computers with operating systems MS Windows Xp, MS Vista and MS Windows 7.

 

 

PLA 33 34 & 44 are designed for electrical network parameters monitoring and energy management. All are fully 4
quadrant devices with continual voltage and current measurement according to norm EN 50160.


PLA 33 is a basic power line analyser which is available in several variants. The most basic PLA 33  is used for substitution of analogue devices, ther models come with communication interface, internal memory and digital inputs / outputs, they can also be used as a measuring point for monitoring and energy management in large SCADA systems.

 

PLA 34 is a........


PLA 44 is an advanced power quality analyser which meets specification according to the norm EN 50160 Class A. Thanks to a
powerful 32 bit processor it  brings many useful features for detailed monitoring and quality analysis of LV and MV networks. It has large memory, various communication interfaces, easy setting and usage, PLA 44 can also be used as a measuring point for monitoring and energy management in large SCADA systems or as a sole monitor in standalone applications on PMS.

bottom of page